Mend Greenmaster Gym/Fitness Equipment

Mend Leisure Equipment, Gym/Fitness Equipment

Find out how to mend it for free.

Ask Question

Find out how to mend Greenmaster gym/fitness equipment

Mend gym/fitness equipment ...

Mend Gym/Fitness Equipment

Mend > Gym/Fitness Equipment

Help! Greenmaster Motor GMD 118-1, Reebok Fusion Treadmill (REV-10301)?

Hi,

Where can I buy a new Treadmill Motor.
Reebok Fusion Treadmill (REV-10301).
Greenmaster Motor GMD 118-1
Open Construction
1.75 HP Continuous Duty
230V DC Power Imput
50/60Hz
4800 RPM

Mid use one day it just stopped! Control panel works fine, incline works fine etc etc ... just no signs of life from the motor at all!

If anyone can point me in the right direction...I did consider taking it to a bloke my mechanic knows who strips and repairs starter moters etc to see if he could sort it...what do you think?

mAdMaCCa
October 2009

Greenmaster Leisure Equipment, Gym/Fitness Equipment Reebok Treadmill Buy

what is the diference between 220v or 180v with this motor can i use them both

peter Vergoossen
May 2014

i have another problem with this motor, it is work as a stepper motor start and stop? can any one help on this?

tareq
April 2014

amature sizzling goes slow stops

collin
February 2014

i am looking to buy one matthew ....
still got it?

nigel k

Nigel kennedy
February 2014

hi, i have brand new one for sale if you are still looking for one it is a greenmaster 1.75 hp 180v dc max power input 4800rpm

matthew mcConaghy
January 2014

check the motor first by connecting it to a 12 volt battery if it runs its something to do with your controller

dave
October 2013

try to change the capacitor on the control board on the rigth side of motor , if u look in front of the treadmill. it is a huge black eletronic piece. My treadmil is working fine since I change this element.

Hugo. Brazil
July 2013

http://www.eliptagliente.it - this company have Greenmaster Motors

Frank
May 2012

same problem but the brushes were OK ,there was damage to comutator segments and it is just about impossible to dismantle the motor to repair without fully equiped workshop Another case of manufacturers rip off (if it breaks they want you to buy another)

oldfatbiker
October 2011

Hello,yers,i have the same problem so if anyone has a spare motor GMD 118-1 .1.75HP THEN PLEASE CALL ME ON MY MOBILE 07881628045.My names Cliff

cliff
July 2011

Â¿Alguien me puede decir dÃ³nde comprar un motor nuevo en Sevilla (EsoaÃ±a)

Alejandro Granados
January 2011

try changing the carbon brushes on the dc motor size of the brushes 16mm x 6mm cost around 32 pound with vat and deliverly

paul lampitt
August 2010

we have some new motor GMD 118-1, but are you sure the motor isn't good?
with no belt drive, give 15 volt dc.
mail to : assistenza at toscanafitness.it

Giuseppe
April 2010

It sounds like a good idea unless you can source parts on eBay or the like.

Just boughtonemyself last week and struggling to find a manual in hard copy or even electronic form on the internet. If I had one, I'd strip mine down to have a look for you although it might not give the information in there.

I would imagine the motor is like any other electrical motor. No doubt the brushes have worn out.

Roger
October 2009