error 245 and then 49 on fisher and paykel washine machine?

i have error 249 on aquasmart so it is definately there but does anyone know what it means

emomum
June 2013

Ive got the exact same problem, error 245 and then 49. How do I fault find this and where can i get my hands on one of these little books.

Russell
May 2013

errore 245 is the locking mechanism. cost approx $60 and can be fitted yourself.

Rick
March 2010

Error 245 is an electrical fault and requires a tech apparently. That is what Fisher and Paykel just told me!

blh4now
January 2010

That's odd. There is no error 245 either. I would be interested to know what it stands for myself so I can add it to my book. If the tech will tell you what error 245 stands for could you post it back here? Thanks.

Lincoln Appliance NZ
October 2009

Thanks for that. It was error 245 and then error 49. Technician is coming out tomorrow. It is still under warranty.

sunshine
October 2009

There is no error code 249 listed in my service manual. Are you sure that number is correct? Error code 49 is a cold water inlet fault. I would say that your husband may of disconnected the wires to the inlet valve. Check that two blue wires are firmly connected to the cold valve & two red wires are firmly connected to the hot valve. If it is definitely coming up with error 249 then you will have to do what it says & call F&P service tech. It must be a new error code they haven't included in the book for some reason.

Lincoln Appliance NZ
October 2009