Recent: Fix food processor motor?

Mend Fisher & Paykel Washing Machines

Mend Household Appliances, Washing Machines
Find out how to mend it for free.

Ask Question
Mend Household Appliances, Washing Machines
Click here to mend Fisher & Paykel washing machines

Mend > Washing Machines

Mend Fisher & Paykel Washing Machine

How can I fix my fisher and paykel washing machine?

My fisher and paykel smart drive excellence 7.5kg washing machine, model GW709AU, serial no. CSN522834 stopped during a wash cycle displaying the following code - from left to right the 3rd, 4th and 7th light illuminated. I turned the machine off and on again and the pump was stopping and starting. I evenually managed to get the water but had to turn the machine on and off a few times. I then went to try a wash cycle. I agitator turned slowly as per usual during fill up but neither hot of cold water flowed in (yes the taps were on) after a couple of minutes the machine beeped showing the same error codes

Ian W
January 2010
Stops after the agating cycle. Beeps

Emedlin
October 2010
That is fault code 50 which is a hot water inlet valve problem. Change the inlet valve for a new one. It could also mean that the main control board is faulty & would need to be replaced but try a new valve first.

Lincoln Appliance NZ
January 2010
Mend Household Appliances, Washing Machines
Click here to mend Fisher & Paykel washing machines

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Household Appliances, Washing Machines
Click here to mend Fisher & Paykel washing machines