Recent: Home max fs506x?

Mend > Chainsaws

Mend Homelite 10454/104544 Fuel Chainsaw Air

Whay is the fuel mixture for a Homelite Super 2 chainsaw?

Can you tell me what is the fuel mixture ratio for a Super 2 Homelite chainsaw Model#10454or 104544,serial#781290329 also what is the air gap setting for the magneto and the flyweel on this model.Thank you

DEan Byrd
February 2006
I have a Homelite Super 2 and have always used AMSOIL 100:1 2 stroke pre-mix oil in it. Even after all these years it still runs great!

Mike and Jill Nelson
August 2007
man all i have to ask is the year? for the older models it would be 32:1 but for the new 2cycle engines polution is a problem so they (companys) use 50:1 oil/gas mixturess... if ur super2 is a old one like in the early 90 or earlier is it a 32:1 mixture... 4OZ of oil per 1 gal of gas.. hope this helps!

Patty
May 2007
The info I gave you is for a Homelite Super 2 serial #45459881. Forgot to reference your serial # Hope the info helps anyway

christian malosh
July 2006
Magneto Breaker point setting (.015")

christian malosh
July 2006
The factory manual states: Recommended First choice is Premium Homelite 32:1 Motor oil(SAE-40) in ratio 1 part oil to 32 parts gasoline (1/4 pint per U.S. gallon of gas or 3% oil)

Second Choice: Homelite 16:1(SAE-30) Motor oil or any motor oil for air-cooled 2-cycle engines in ratio of 1 part oil to 16 parts of gasoline (1/2 pint oil per U.S. gallon gasoline or 6% oil

christian malosh
July 2006

Related Questions ...

Mend chainsaw wont start
2

my mcculloch chainsaw won't start?

Need to know how to set fuel /air mixture screws.
Mend chainsaw filter throttle
1

Mac 3516 chainsaw?

The saw will start and run with the choke on full, But when the choke is moved just a little bit to half choke... [Read more]
Mend chainsaw Ryobi fuel
3

Ryobi 4545 chainsaw cuts out when under load?

My Ryobi 4545 chainsaw starts fine but after around 30 seconds of use cuts out. After it stops if I remove the... [Read more]
Mend old homelite chainsaw xl
2

I have an old homelite chainsaw model Xl that is overheating?

I have an old homelite chainsaw model Xl that is overheating to the point that the fuel is boiling. I have us... [Read more]
Mend mcculloch chainsaw help
1

mcculloch chainsaw help?

the hose that runs from the crankcase to the carburetor deteriorated and broke. can the engine run w/o this? ... [Read more]
Mend chainsaw carburetor fuel line
1

Poulan 2050 fuel line routing?

Poulan 2050 chainsaw. Fuel line routing: Replaced all fuel lines which had rotted away. Primer bulb is marked ... [Read more]
Mend chainsaw fuel spark plug
2

Craftsman 18 in. model358.350810 quits only when cutting? ?

I have a refurbished Craftsman chainsaw,used it for about 20 hrs,ran great ,then only when cutting it quits, r... [Read more]
Mend start tank empty
2

Stihl P 50 !! chainsaw will not start?

It stopped during use from what appeared to be lack of fuel (tank appeared empty ). Added fuel (same as was u... [Read more]
Mend chainsaw carburetor fuel filter
3

Can't get Craftsman Chainsaw(42cc C944.418460) to idle?

My chainsaw was getting very hard to strart. I pulled the carb off and cleaned everything. I have not yet c... [Read more]
Mend chainsaw adjustment mcculloch
2

Air/fuel screws-McCulloch Eager Beaver-600123D?

Does anyone know where to set the air/fuel ratio screws on this model McCulloch chainsaw? I turn them in all ... [Read more]
Mend saw wont start
5

saw runs great, then cuts out and wont start?

i was given a craftsman 18" chainsaw. It runs excellent for about 10 minutes, then cuts out. Will not start ... [Read more]
Mend will acts will run
5

My Homelite chainsaw model UT10901A will start but will not run, acts like?

My homelite chainsaw model UT10901A will start, but will not run. It is brand new, sat in box for a few years ... [Read more]
Mend running years day
1

I can't keep my Poulan pro 260 chainsaw running!!?

My chainsaw is 3 years old and not used much. Tried starting it after few months from last use and started ok.... [Read more]
Mend How to mend it?
5

my homelite timberman 45 chainsaw starts then bogs out 20"?

homelite chainsaw starts then bogs down when you hit the trigger. If you feather the trigger it will try to ru... [Read more]
Mend great three times
6

Homelite chainsaw will not start?

Ran great when I put it away, it's three years old. I've used it lighty a dozen times. Fresh clean proper fuel... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Chainsaws ...