Ran great when I put it away, it's three years old. I've used it lighty a dozen times. Fresh clean proper fuel mix. new spark plug. Homelite d3850b. Has spark at the plug. Sprayed fuel in the carb. NOTHING. Air gap at the magneto .002 Brake not on. Kill switch off, does have spark at the plug. Compression is good. I'm a automotive mechanic and have'nt been able to figure it out. Tony? Engine spins over freely with plug out. Plug in has compression. Has not been abused. help. thanks
Return the POS saws personally with gusto to the US Chamber of Chinese Commerce. Fit them directly into the manufacturers' CEO and CFO's bonus plans precisely where he/she sits. Rotate the POS saw 360 deg. rapidly with precision. Repeat until his/her lower digestive tract fits it like a well-oiled glove absorbing the POS chainsaw he/she sold that worked 1.5 times or until his/her latest bonus check was written. Enjoy
azimuth
May 2011
have u cleaned the muffler on it thats how it gets fuel
matt
December 2009
Take off the exhaust ( 3 long screws )on the side you will see a screen. Take it off and see if you can see any blockage, if so burn it off.
Mark/Wolf
January 2009
hey tyr cleaning the magneto with some emory cloth and try putting a little,just a little, gas in the chamber,not the carb
joseph
May 2006
I think you may need to pull the air cleaner sponge out and
add a little fuel in the air intake....to prime it.....there is a pin
that needs fuel to float.......I always have to do this with mine
when it has not been used for a while.
Good Luck
John
John
September 2005
hey my names chris i have a old poulan 306. it was given to me.cleaned it and put good gas in it spayed the carb it started be it wont stay started id appreshieate if you got back with a awser
chris
September 2005
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix chainsaws.