I have hot water but no heating, how can I check the CH thermistor, I read somewhere about using a resistor to see if the CH strikes up, can I do this, what size resistor do you recommend, if it doesn't strike up what else should I be checking. the boiler broke down all together last month, replaced overheat stat and water was restored, but no CH since.
Did I say Thermistor, No I said originally that I had read somewhere on how to check if a thermistor had blown by using a RESISTOR conected to both wires instead to see if the boiler would fire.
Is this the case or not, what size RESISTOR should I use to test it with - 15k OHM?.
some helpfull advise other than the attitude and costly engineer would be good!!!!!!!!!!!, but I guess you wouldn't know what a RESISTOR did or looks like would you?.
ELMO
September 2009
What size thermister do you recommend?? WOT A PRAT!!!
Do as Ian says , get an engineer ,like myself, whos paid thousands on quals and has has proper training, Fair enougth you might be handy at diy but dont try and play with the big boys if ye asking piss poor things with an attitude also
Spila
September 2009
Why's that then. if I can save myself a bob or too I will.
I'm not touching the gas valve or anything associated with the gas system, I've succesfully carried out three repairs to this boiler previously, two of which where the ignition and main pcb. what I would like is some constructive assistance in what i need to do. be it safely, I'm not in the habit of blowing my home up thank you.
Elmo
September 2009
get a qualified engineer to look at it, you shouldn't be tampering with it by yourself.
Ian
September 2009
Yes, I have fully checked that everything is as it should be, adequate / no loss of pressure, tried the thumping as I know that this has worked before, as I say a month ago got up, no water or heating located problem to be the overheat stat, now have hot water but no heating, no lights no lock out/ reset. nothing, makes a noise but doesn't even attempt to ignite no spark or didley.
Elmo
September 2009
sounds crazy mate but have u checked that the flow and return valves located under boiler are both open and that the pump is running
jeff
September 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.