Speed Queen Washing machine?

unplug the machine. at the bottom edge on the front their are two 5/16 hex head screws. unscrew and remove. swing the bottom edge out toward you until, at about a 45 degree angle, the hinges on the inside front lip clear and the front removes. (there are also two "retaining" clips half-way up the front at the left and right edges..."pop" them out as you are swinging up. now you can see where the water is coming from. either the pump, on the right, or a hose leading to or from the pump, or the tub (usually leaks at bottom center), or a hose leading to or from. good luck. remember. UNPLUG the machine. and shut off the water as soon as you discover where the problem is.

Dan
September 2009