Small problem,
Not used it for a few months for the heating side, just hot water, all well there,
Just turned it on for the heating to make sure it was working last night, and all the rads where stone cold, but the rad above the boil was nice and hot, 6 rads only 1 hot.
Will it be a case of bleeding all the water out, or is the pump on its way out.,
drained all the water out, pressure was fine on the boiler, re filled it, but its still 1 rad that get hot, but the boiler will fire and then stop after (say) 30sec, and wont fire back up for a couple of min's,
its starting to do my head in now,
steve
August 2009
check the system pressure and try bleeding the rads before looking far any further problems
Ian
August 2009
check for air in the system
stew
August 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.