how can fix my stihl 011 avt ? It does not stop on the switch?

1 part oil to 40 parts gasoline (with Stihl 2-stroke engine oil)
or
1 part oil to 25 parts gasoline (with other brands of oil)

Steve
October 2009

Take the starter housing off and clean the area around where the metal part of the stop switch makes contact with the stop wire,that disapears behind the flywheel. (It's a wire contact mounted in white plastic insulation). Good luck. Post again if no luck)

Tricky
September 2009

When the switch is in the STOP position, there is a contact at the back of the switch that grounds-out the ignition coil thereby shutting down the engine.

40:1 according to this site>
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/98ff65f86b956a2188256dee005b7cc3?OpenDocument

Shooter
September 2009