pcb board blowing 1 amp fuse,boiler was working fine then was moved location now blowing fuse ,which has been replaced (quick blow type )fan seems to spin freely and no obvious faults /
Thanks for help
Had the pcb checked out and few dry solder joints repaired (£50)cleaned up fan blown out runs free and boiler now starts but blow fuse after a while ?
Stuart
August 2009
you have a short circuit, if it's only since it's been moved then check the wiring for the boiler and controls.
Ian
August 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
