Recent: Fix food processor motor?

Mend Dishlex Dishwashers

Mend Kitchen Appliances, Dishwashers
Find out how to mend it for free.
Ask Question
Mend Kitchen Appliances, Dishwashers
Mend repair fix Dishlex dishwashers

Mend dishwashers ...

Mend electrolux dx302 dishwasher
Recent

How do I turn the delay off on Electrolux DX302 dishwasher?

How do I turn the delay off on Electrolux DX302 dishwasher
Mend hotpoint aquarius wash light

Hotpoint Aquarius FDW20 diswasher?

Hotpoint Aquarius FDW20 diswasher, Wash light are flashing?
Mend Kitchen Appliances, Dishwashers

How to fix Kenwood Slimline Dishwasher KDW45X20 with a F1 Er?

my Kenwood Slimline Dishwasher KDW45X20 keeps giving a Fault Beep F1, after about 15/20 mins or so into the wa... [Read more]
Mend e1 code dishwasher water

Clear E1 error code on smeg dishwasher with no water or leak?

why is my smeg dishwasher still showing an e1 error, but there are no leaks and there is no water in the tray ... [Read more]
Mend dishwasher water white

Why is dishwasher not fully drained of water?

Built in De Dietrich 2011 model dishwasher. I took out the plastic white dirt filter,put it in the cutlery box... [Read more]
Mend Dishwashers

Mend > Dishwashers

Mend Dishlex Dishwasher 10

How to fix a Dishlex 302 dishwasher with fault # 10?

My Dishlex 302 dishwasher keeps coming up with a fault # 10. It starts a cycle and then after 2-3 minutes beeps and diplays the number 10 on the LED. I have just replaced the control board as they have a common fault and will not heat up, now this problem has occurred. It seems like it is not taking enough water in and I have checked the hose and it seems fine. Any help please?

Craig
July 2009
DishlexKitchen Appliances, DishwashersDishlex Dishwasher 10
Fault code 10 is when machine is not filling. If you have checked tap is on & hose is not blocked then either the water valve is faulty or the control board is faulty & not turning water valve on. You need a multimeter to test. Put on ohms range & test across the two terminals of the inlet valve for a possible open circuit. Disconnect the wires first. If ok then put on AC volts range & see if power is going to inlet valve. If not then control board is the problem.

Lincoln Appliance NZ
August 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Dishlex Dishwasher 10

Mend Kitchen Appliances, Dishwashers
Mend repair fix Dishlex dishwashers
Mend dishes properly load

How can I make my Dishlex Global 500 clean the dishes properly?
Mend problem water inlet

Problem with water into Dishlex DX302 & it won't start from wash setting?
Mend model dish washer

What causes error 50 on a dishlex model 302?
Mend dishlex global 450

How can I fix My Dishlex Global 450?
Mend fixing water leak leaking

fixing water leak in Dishlex 103?
Mend dishwasher manual user

Dishlex D300 dishwasher?
Mend water runs thing

hi there one and all,?
Mend timer switch dishwasher

manual timer knob switch on Vulcan Dishlex 100s dishwasher?
Mend cycle stops machine

NF code Dishlex 500?
Mend front panel top

How to replace a front panel DX103?
Mend lower door seal

Dishlex dx103?
Mend off switch not working

On/Off switch not working?

Other models...

Dishlex 103Dishlex Global 500

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.

Related Categories

Mend Blenders/Mixers
Blenders/Mixers
Mend Breadmakers
Breadmakers
Mend Coffee Machines
Coffee Machines
Mend Cooker Hoods
Cooker Hoods
Mend Electric Cookers
Electric Cookers
Mend Electric Kettles
Electric Kettles
Mend Food Processors
Food Processors
Mend Freezers
Freezers
Mend Fryers
Fryers
Mend Gas Cookers
Gas Cookers
Mend Juicers
Juicers
Mend Microwaves
Microwaves
Mend Refrigerators
Refrigerators
Mend Toasters
Toasters
Mend Waste Disposal Units
Waste Disposal Units

Mend Kitchen Appliances, Dishwashers
Mend repair fix Dishlex dishwashers

Try fixfault.com to fix dishwashers.