Mend > Washing Machines

Mend Indesit W123 Machine Rinse Stopped Spin

How do i fix my indesit w123 washing machine?

hi, i have an indesit w123 washing machine which stays on the rinse cycle until stopped, you can reset it and put it on to spin but the clothes dont seem to be fully washed, i suspect it has something to do with the water heater, where is the water heater and how do i fix it if its malfunctioning

thank you

andy

andrew rennie
September 2004

Indesit Indesit W123 Household Appliances, Washing Machines Machine Rinse Stopped Spin

my washing machine is poring out water from under neath

sharon davies
December 2004

thank you, i replaced the inlet and the machine is working perfectly again.

once more

many thanks
andrew

andrew rennie
October 2004

to test the selenoid check with a meter that there is a resistance across the two terminals but remove the wires first if it is open curcuit ie no reading you will need to replace the valve you did not say how many outlets there are one the cold water valve

RS
September 2004

how do i check the valve, ie should there be a resistance accross the two connectors on the solenoid and how do i fix it if its broken

thanks

andrew rennie
September 2004

The cold fill pipe fixes to the cold water inlet valve if you look inside the m/c you will then see where the valve selenoids are located

RS
September 2004

where do i find the cold water inlet valves?

andrew rennie
September 2004

Check the cold water inlet valves it sounds very much like the one that supplys the water to the conditioner is not working.
The heater is not in use during the rinse cycle

RS
September 2004