i have a noisy hotpoint first edition washing machine?

sorry davy mac there is no sqeeling,its a banging noise
similar to worn bearings.but only at low speeds
it goes quiet at top spin
thanks for your promt reply if you think it could still be the belt let me know
muppy

muppy
June 2009

Could be a worn or loose drive belt. Un-plug the machine and remove the lid and the back access panel. Check the belt for fraying and/or wear. If okay, pull the belt to see it's tension. It should be taught, if it's not, go to the motor at the bottom of the machine. loosen two of the motors retaining bolts, push the motor down gently, which will tighten the tension of the belt, and whilst holding in position, tighten the retaining bolts.
Re-fit the lid and back access panel and try the machine in the setting where it made the noise. Hopefully this will correct the squealing....Good luck.

Davy Mac
June 2009