I was given a New Home Sewing Machine with no manual. I haven't used a sewing machine in years and I'm very confused and can not find my answer any where. On the printed plate it says it's a Double Duty Model #532 Serial No. 13945 - Manufactured by Janone Sewing Machine Company LTD - Japan and I have no idea how to thread it or set the tensions. Please HELP!!!
Hello Jody,
To thread the top, cotton reel on the spool pin, make sure the presser foot is up and the takeup lever at the top, take the thread from the cotton reel to the left and in the guide on the top above the tension unit, take the thread down the right hand side and go round the tension unit and back up the left side to the takeup lever, thread through the takeup lever right to left, take the thread all the way down to the needle going through any guides on the way, thread the needle left to right, the flat side of the needle must face right, top tension about number 5, an instruction book is available for that model and I can give you the site but you will have to email me, this site no longer allows email addresses to be shown but type in my address below as you say it not as you read it. make sure you remind me of your question if you email me.
Ken
drivewithken at blueyonder dot co dot uk
June 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix sewing machines.