John - Got one side off now ! Many thanks for your help.
Harry J
May 2009
No need to Harry, just use the correct socket and bar, and the crimps will bend back themselves. You are supposed to use new nuts when you put it back together, and punch the edge back into the groove when the job is done.
John
May 2009
Thanks John - The large nut appears to have a raised front section which looks "crimped" onto the center shaft - Do I need to free this first?
Harry J
May 2009
Take the road wheel off, followed by the small hub cap in the centre of the brake drum. Beneath that you'll find a large nut that unscrews and the drum should pull clear.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.