t101v2 laser line alarm not opening car properly?

Hi!

Do you still have problems with your Laserline T101V2 alarm?
If you still have problems, can you tell me the type of your car alarm?

I don´t mean the type of the fob, but the type of the alarm itself.

If you found it I could probably help you...

Daniel
October 2010

holding the button down on the fob wont work, you could break into anyones car doing that!! you need a working remote or touch key, go through a sequence which will get the dash led to go into learning mode ie., on steady red. Now you can input your new fobs and touch keys, must program them all at once, even existing ones. How you get the correct sequence for steady red led is another matter altogether, most want you to pay for that info,.. try Google

Tam
April 2010

hi guys, i jus bought a new fob off ebay for £15....i need to re-program it to my alram! how would i do that??

Faraz
March 2010

Just been advised by Laserline supplier that if you stand by the vehicle and hold the button on the fob furthest away from green light, for 10 secs and then retry alarm it will reprogramme. I can verify that this works. Much joy!!

Mel
January 2010

Hi to both people above. Got exactly the same problem as you two. Did either of you solve the problem? New fobs are expensive - would like to avoid buying another. Many thanks.

Melinda
January 2010

Hi Jake, I have the same problem, have you found it out already? If so, could you please advise? Thanks in advance.

Mark
January 2010