i take it you had bleed screw on filter outlet open whilst pumping, and was there plenty of fuel there? if not it might be a faulty pump on filter head [common fault] -either diaphragm goes or rust holds one of valves in filter head open so you can't draw fuel!
k
April 2009
Undo the 8mm bleed nipple on the injection pump, push some plastic pipe on to catch the drips, and operate the priming pump again. When the fuel flows without any air bubbles, the engine will start.
John
April 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
