I have aquired a Templar Tiller rotavator with a 3.5hp Honda pull start engine. The engine appeared to be seized, but after removing the pull start mechanism & pouring WD40 down the plug hole, with a socket and wrench the engine turns over up and down to top dead centre but not beyond. Sticks at TDC. Any idea what the problem might be? Thanks - Paul
Hello John,
I have had another look at the engine, and it is OHV.
I have removed the rocker cover, the pushrods & rocker arms are very loose, you can easily remove them from the rocker arm ball socket. Is it possible for one or both of the valves to be stuck open?
Paul
April 2009
If the Honda is an overhead valve engine (OHV) there is a chance that the piston, as it rises, is clouting the stuck open valve. Just a thought!