BT freestyle 2200?

handset receives call,but cuts off approx 60 secs,
batteries checked ok. tried new batteries,but same
problem.line just goes dead.

mr brian cook
March 2012

Registering a BT Freestyle 2200 handset
1. If there is a handset in the base remove it whilst you are
registering the new handset.
2. Press and hold the button on the base for about
10 seconds until you hear a beep and the In Use light
starts flashing.
3. On the handset to be registered, press and hold the
and buttons together until display shows 65-.
4. Enter the base number. If this is a new handset then the
base number is 1, the display shows 65-1 then PIN.
5. Enter and registration starts. When the
handset beeps and returns to standby registration is
complete.
Registering another GAP compatible handset
1. If there is a handset in the base remove it whilst you are
registering the new handset.
2. Press and hold the button on the base for about
10 seconds until you hear a beep and the In Use light
starts flashing.
3. Set the handset to be registered into registration mode
(see user guide for that handset). When it asks for a PIN,
enter .
4. When the handset beeps and returns to standby
registration is complete.
De-registering a handset
You can de-register handsets using only BT Freestyle 2200
handsets that are registered to that base (you can’t use
other GAP compatible handset to de-register a handset).
1. On the BT Freestyle 2200 handset, press and hold the
and buttons together until the handset beeps
and displays PIN.
2. Enter . The display shows PIN0000 and HS-.
3. Enter the number of the handset you want to de-register,
for example, . The display shows PIN0000 and HS-3.
The handset beeps when de-registration is complete.

Ian Portsmouth ( openreach technician ).
April 2009