F1 code?

hi- i'm having the same issue with my dishwasher. i can't seem to get the bottom draw tray to open. is there are switch or button i need to press to open it?
thanks.

leyla
May 2009

F1 is the flood switch has operated usually because water has leaked onto the floor tray. You will need to switch power off, remove the lower trim panel beneath the door & the sponge sound deadener behind it. You can then see in to the floor tray & see of it is wet. Dry it out. Power on & run machine. Watch if water comes back & where it comes from. Warning: don't touch anything inside there while power is still on at wall switch. Be careful.

Lincoln Appliance NZ
March 2009