Recent: Mountfield sp454?

Mend > Switches and Sockets

Mend Immersion Turned

my immersion trips when the immersion is turned on?

I've just installed a new switch to my immersion but when i bell out the cable it shows live and earth to be making contact. Everything is wired perfect, could there be something wrong with the installation on the immersion.

Tom
March 2009
There will be a certain degree of contact between live and earth which is one of the reasons it has to be hardwired. Try testing the resistance between them, you should get at least 1Megohm. If not there is something wrong.

Adam
March 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Immersion Immersion Turned

Related Questions ...

Mend gas boiler heating fault
3

Boiler switches on/off every minute when heating hot water?

Hi. I need some advice please. I'm renting a property which has an Ideal Classic LX FF & FF Fanned Flue Gas... [Read more]
Mend How to mend it?
2

banging pipes?

i have an ideal icos he24 boiler.over the last 6 months the system has slowly developed a very very loud bang... [Read more]
Mend turn water cold
1

turn off hot water supply?

We want to install a new kitchen tap. Cold water can be turned off at stopcock no problem. We have indirect su... [Read more]
Mend boiler immersion heater thermostat
2

Flood due to boiler ???

A few weeks ago we noticed warm/hot water pouring out of the eaves of our house, upon inspection we found that... [Read more]
Mend boiler central heating domestic hot water
4

Rayburn Driven Central Heating Problem - Upstairs Cold?

I have a Rayburn Gas CH system with a seperate pump. The cooker / boiler is in the basement kitchen with 3 ra... [Read more]
Mend boiler heating thermostat
1

Glowworm Spacesaver KFB 50 fires up without water or heat called for?

Have had the programer replaced, motorised valves are working correctly (supposedly) Immersion tank thermostat... [Read more]
Mend water problem going
3

No water in hot water tank?

Hi there, I have a problem... lol I'm afraid I'm going to err on the side of giving too much information... [Read more]
Mend boiler combi hot water
2

Potterton Kingfisher 2 not going 'wumph'?

So it's been a couple of interesting days in the warmth of my world... My fiancee managed to break the connect... [Read more]
Mend boiler radiators thermostat
5

minimal heat from radiators and hot water system?

Since turning the heating back on our hot water has cooled down to minimal heat and the radiators do not get h... [Read more]
Mend boiler heating noise
2

Baxi Solo PF 2 40 Loud buzzing/clicking?

Ok, apologies if there is a post already for this question. So, i have the above boiler & it has been working ... [Read more]
Mend thermostat hot water immersion heater
1

How can I fix my Triton LP Shower?

My Triton LP shower gives very hot water even at the lowest temperature setting on the thermostat. Some time a... [Read more]
Mend leaking bottom left side
2

why is immersion leaking?

Immersion heater (Backer BC311C I think) is leaking at bottom front and left side. How bad is this and what sh... [Read more]
Mend hot plug socket
3

Hot Plug?

My immersion heater for the water is controlled by a plug and socket in the hall way. I've noticed the plug/so... [Read more]
Mend immersion heater hot water plumbing
2

I have no water coming out of my hot water taps?

I changed the immersion heater, turned off the water in the loft ( held up the ball**** ) then turned on the t... [Read more]
Mend heating thermostat hot water
1

How can I restart my Potterton Kingfisher II boiler?

Boiler is not working, no hot water or central heating. I turned thermostat up, nothing happens. I don't thi... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Switches and Sockets ...