How do I change the berlt on my Eureka Altima upright vac? I've been trying to find out how and where to open it so I can replace the belt and I can't seem to find an opening. Please help.
First off, unplug unit from the wall. Drop the handle to lowest level. remove two black screws from top of upper plate, they will be close to right and left edges , just above the brush roll, the upper cover will lift off from the brush roller, and snap off near the motor cover, the old belt will visible and the new belt gets stretched into place. The rear part of the upper cover snaps hard into place and the two screws gets secured above the brush roller. Temperance Fix it Shop, Temperance Mi
Joe
March 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vacuum cleaners.