my van has had the same problem every time i got it tested seams to be a flaw with the braking system 00+ models! last time i had to replace pads hubs and brake pads to get both sides braking the same,the hubs can be hard to remove, i think u need to put screwdriver though the hole where the bolts go in and unclip brake shoes! and mayb invest in a rubber mallet.
hope this helps :)
will
April 2009
How do you take the rear droms off??
I have a 350M year 2000, and It's like it's welded on there.
Can find any screws that could hold it, so I guess it's just rusted thight..........
Have been going at it with a hammer and heat, but it wont come off???
BoSJo
April 2009
did it fail on service brake and handbrake. it could be adjusment if it failed on both. fit it only failed on service brake it could be cylinder and if failed on handbrake it could be cable. best thing would be to fit new shoes to be sure and check cables and cylinders when dismanted. this is not an easy job so get a mechanic. sometimes very hard to get drums of rear of transit.
mickmann
March 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
