How can I fix the heater on a CL 767 White Night Dryer?

cheers for the tip. I had the same fault, feared a needed a new element. Pressed the red button and it's working perfectly well now. Not sure why it tripped in the first place? Is the condenser the heat exchanger box at the base of the dryer? and how is it best cleaned out? Thanks again

andyB
February 2009

Pressing the reset button did the trick, did'nt realise it was there!! Its a red circle in the centre at the back of the dryer for anyone else who has this problem. Thankyou very much for the help.

skyman
February 2009

remove the kidney shaped panel on the back of the dryer.this will expose the element and if it has blown you might be able to see.also there is 3 thermostat.any of these could be the fault also.have you pressed the red reset button on the back and washed the condensor out lately?

ck
February 2009