Thanks Steve, I have also been told I need a special tool for the clutch for this chainsaw. Punching the clutch looks iffy as to breaking something along the way. The clutch has a three screw removalable cover plate. Thanks Again. Dave
Dave
February 2009
Usually you take the plug out, place a piston stop in the plug hole and then knock the clutch off in a CLOCKWISE direction with an old screwdriver/punch or spanner if it has a hex spanner fitting. Always grease the bearing when refitting.
steve
February 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
