Had the same prob not hard to fix if have right parts.prob is inside the indicator box metal fillings build up and short it out just needs good clean.you need to open console around steering wheel to do so you need a TT15 hex drill bit and a thin adaptor to fit in the holes underneath to unscrew the 2 screws.once off there 2 screws holding the indicator you need a CR/VT8 hex drill bit to undo these then it justs slides out.undo the wires which should free it,most awkward to do is getting inside the indicator once done clean the metal track where the pin runs.it worked with mine has happened twice so far but seems todo the trick and saves money
Hodgey
February 2009
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.