Sony TV: No picture, audio works, red stanby light blinks?

I have done extensive research on this. Most likely it is a bad solder connection on the PC board on the yoke or in the flyback section. Remove the back and tap around with a non-conductive stick while watching the screen in a mirror. The problem is called a "1K problem" -- a safety feature that prevents the CRT from turning on without the right voltages. You can also try to CAREFULLY adjust the screen control at the flyback (NOT the focus control).

Jack
February 2009

hi, the same thing happened to mine last night! I called the Sony repair number. I was told this means the switch or cable is faulty. DOes this help you? they want to charge me £60 for the callout plus parts, sounds too expensive!

flick
February 2009

Replace the lamp i beleive would fix it.

kelly
January 2009