Recent: How to Fix Hitachi DZ-MV550A Error Code 2881 | Guide

Mend > Washing Machines

Mend Indesit WD125 Washer Clicking

how can i fix indesit wd125 washer dryer?

will not accept a programme. when you click on a programme the light flashes as though it is accepting it but then it makes a noise but does not fill up with water then starts clicking through all the programmes I have to switch it off to stop it. When I switch it back on does the same thing. Indesit WD125 washer dryer.

Darren
November 2005
The clicking is a fault code - count the clicks - eg ten clicks then search net for ten click fault code. mine did this and it was a blocked filter accessed via front bottom panel then unscrew filter clean and replace

Andy
July 2011
it mite be leakin water in the bottom or take the cap off at the bottom of the machine and see if its blocked cus that happened to me

alan
May 2006
Hi Darren,
sounds like the same problem that I have.

My local repair agent said that it was probably not worth fixing.

After speaking to Indesit they said that the thing to do was to power off at the mains then do a reset (how to do this is in the manual apparently)

Although this sounds a bit like a stock answer!!

The alternative is to cough up £149 and sign up for their service plan and get this fixed and a 1 yr guarantee as well.
Sounded like getting it fixed would be more expensive.

I think if the reset doesnt work its probably time for a new one!!

Cheers
Paul

Paul
December 2005

Related Questions ...

Mend start wash dry
2

Indesit wd11 wont start wash or dry cycle?

My indesit wd11 washer dryer doesn’t start. I have put on desired settings and then when clicking the on but... [Read more]
Mend washing machine Indesit clicking
1

My Indesit W133S washing machine?

When I put my washer on a programme it starts to fill with water then after about 30 seconds the programme sel... [Read more]
Mend washer dryer indesit
1

washer/dryer indest wd14?

why does the programme timer keep clicking non stop through cyles even when put on black stop button
Mend washer dryer inlet valve faulty
1

Indesit WD12 keeps filling with water?

My Indesit WD12 washer/dryer keeps filling, the hose that comes from pressure switch is clear, the pressure sw... [Read more]
Mend indesit dryer starts
1

indesit wd125 makes a clicking sound?

i have indesit washer dryer and now when i put it on program it starts water goes in then goes for a bit then ... [Read more]
Mend washing machine problem appliance
1

why does the dial keep clicking round on my indesit washer?

the washer will not start it just keeps clicking round and round
Mend washing machine drum repair
3

Indesit Omega 1200 (1196w)?

My indesit washer will not turn at all, Even on the wash part of the cycle it will not spin or even turn, it f... [Read more]
Mend washing machine indesit repair
2

Indesit WG1033T Not turning?

I thought I'd post a question before I called someone to look at my washer to see if there is anything else I ... [Read more]
Mend washing machine Indesit clicking
4

My Indesit W123s washer only works on programme 8?

My Indesit W123s washer only works on programme 8. if i try any or the other programmes the water fills but th... [Read more]
Mend Indesit Washer Dryer Fault
1

indesit wd12 stops at rinsing and timer keeps rotating?

Hi there, my washer/dryer indesit wd12 starts ok but stops at rinsing stage and the timer keeps clicking an... [Read more]
Mend dryer cycle circuit
5

Indesit WD12?

My washer dryer refuses to go through the cycle. The 'knob' just keeps clicking and turning. We had a new ci... [Read more]
Mend programme clicking round
2

Repairing my Indesit W161?

The programme knob on my indesit washer W161 keeps clicking round and will not set the correct programme. It f... [Read more]
Mend washing machine repair knob
2

how can i fix my indesit W123S washer?

when put on a wash cycle the knob keeps clicking roun and does not stop.
Mend indesit washer filter
3

Indesit WD12 washer-dryer fault code and moving dial?

My Indesit WD12washer-dryer has gone into fault mode with the control knob continuously clicking round. The in... [Read more]
Mend indesit fault clicking
2

Can anyone tell me what this Indesit washer-dryer error code is please?

My Indesit WD10 washer-dryer has gone into fault mode - control knob continuously clicking round. The indicat... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...