i had a broken belt and have got a new one the only thing is i can see where it goes on the motor but where does the other end of the belt go does it go right around the drum as i cant see any where else to fit it and would i have to take the whole back off or just the shaped bit that is screwed on to the back it is a white knights model 38aw id be gratefull if someone could help me please
remove all the screws from the back panel,then carefully pull the back out until there is a gap for the belt to go between back panel and drum.fit the belt around drum (will be tight),then tip dryer on its side and remove plate on base (4 screws).find belt and pull it as hard as you can over the motor pulley ( very hard ).reassemble and try.
ck
December 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix tumble dryers.