Mend Craftsman Lawn Mowers

Find out how to mend it for free.

Ask Question

Click here to mend Craftsman lawn mowers

Mend lawn mowers ...

Mend Lawn Mowers

Mend > Lawn Mowers

Snow Thrower Repair?

I have a 2 year old Craftsman 9HP Snow Thrower that has had limited use. The Auger Housing broke in two and half slid down the worm shaft toward the impeller. A piece of the left side housing is missing, exposing the shaft and the parts that are on the shaft. The auger stops when it contacts a snow pile. The housing pieces can be purchased from Sears for around $44.

How difficult a repair is this and will I need to buy additional parts.

R Saffire
December 2008

Craftsman Garden Tools, Lawn Mowers

Looking for the slide assy for a MTD 310-550-000 it is no longer made (part that is) part no 05880

jerry from Ks
November 2014

There is a minor adjustment that will ensure the drive pulley is not slippping. This should resolve your problem.

Tom
November 2009

I have an ariens 1124 pro snow thrower and have noticed that the gear shift and relative speed for each notch have slowed and have difficulty in an upgrade moving position. What would cause the speed to diminish? How can I rectify this problem.

Kevin
January 2009

this job is time intensive. you need to remove the whole auger assy. you have to disconnect all the pulleys that drive the auger to pull it out. if your mechanical you can do it. the only problem you might have is getting the pulleys loose if they're rusted. might need a torch.

jon
December 2008