After switching off the power to the cooker you open the door and remove the shelves and side shelve supports.
Remove the 2 screws at the bottom holding the cover
over the fan - you may need to hit the top of the screwdriver with a small hammer as they get rusted up.
The cover hinges up and if you slide it to the side the tabs release from their slots.
The fan element can be seen - remove the 2 torx head screws and you can then pull the element away but not too far or you will pull the wires off.
Remove the wires taking note where they go and make
sure you don't let go of them or they will dissappear down the back of the oven and then it is a case of
taking the oven out !
Plug in the wires to a new unit and reassemble in reverse order of the above.
Mark... who's oven just broke on New Years day !!!
January 2009