Recent: Home max fs506x?

Mend > Chainsaws

Mend Homelite 330 Running 10 15

What causes a Homelite 330 Chain Saw starter to lock up?

After running the saw for 10 - 15 minutes, the starter rope will not pull, it feels like the motor is locked up. I removed the housing and put a socket wrench on the the starter assembly and was able to turn the motor. When I reassembled, it started once and then tid the same thing again.

Mike Shutts
November 2008
I don't think the starter to be the problem. I think it's rather the piston locking inside the cylinder, maybe because there's no 2T-oil added to the gasoline or because the quality of that oil is a bad one. If you take off the exhaust system you will see in what conditions piston & cylinder are.

jacob
December 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Running 10 15

Related Questions ...

Mend start background windows
2

how to make mse start & run in background windows 7 64-bit desktop pc?

DATE: APRIL 15, 2018. I am a NOVICE PC USER. I have an HP Compaq Presario CQ5720F Desktop PC running Windows ... [Read more]
Mend hand running too
2

second hand running too fast?

My son made a wooden clock face in his shop class.So the timing mechanism is simple and runs by small battery.... [Read more]
Mend gearbox diagnostic peugeot 206
1

peugeot 206 lx automatic gear box problem?

If you start and drive the car from cold the minute you drive up an incline the gearbox will either go immedia... [Read more]
Mend fuel pump relay restart
4

vw sharan r reg cutting out?

dealership can't find problem paid hundred's of pounds for what it might be but still occuring. Have changed r... [Read more]
Mend lawn mower spark plug
3

Lawn-Boy Starts, will not stay running?

I have a 2005 lawn-boy 10685 with the Tecumseh engine. It will start (only if you prime it), and run for 10-1... [Read more]
Mend boiler heating Worcester
1

my worcester 350 combi boiler keeps cutting out?

When running the central heating the boiler runs for approx 10 -15 mins and then the flames go out but the pum... [Read more]
Mend vokera boiler hot fault
1

vokera linea combi boiler problem?

have just moved house, when the boiler is set to hot water only. when the water temp drops below 40 on the di... [Read more]
Mend boiler heating repair
2

Will a new fan solve the problem?

The fan on my Potterton Netaheat 10/16 boiler is noisy & running slow, resulting in the boiler not turning on.... [Read more]
Mend lawn mower engine stalling
2

How to it [Honda Harmony 2013 13hp]?

After running for about half an hour. It stalls and has to sit for about 5 to 10 min. before it will start. It... [Read more]
Mend cutting works stops
1

Why does my Dyson DC04 keep cutting out?

My Dyson DC04 works perfectly well for a few minutes [maybe 10-15 minutes] then just stops. I have to wait for... [Read more]
Mend boiler central heating pressure
1

my Vokera maxin24e keeps locking out?

I have had replaced so thermostats, diafram, heat exchanger also the have tested gas flow and water, ignition ... [Read more]
Mend water 10 mins
1

Dual Flush loo keeps pulling water in from mains every 10 mins?

We had our sottini dual flush loo fixed a couple of weeks ago. Water was running all the time inside. teh pl... [Read more]
Mend laptop blue screen
1

laptop blue screen?

when running my laptop on mains power after 10-15 minutes the screen turns blue
Mend problem starts 20
1

stalling problem International 460 Farmall?

It starts fine and runs for 15 to 20 minutes untill it gets warm and it stopps running. Once it sets for 10 mi... [Read more]
Mend combi boiler hot water heating
1

Hi, to anyone who can help me, please:-)?

I have a Baxi Bahama 100 combi boiler, to get a hot water, I need to wait long time for the hot water to comes... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Chainsaws ...