my zanussi wjd 1257w has no heat when on dryer settings ?

there is a resetable stat on the dry duct.check belt is ok to dryer fan.check condensor on righthand side isn't blocked (looking from the front).you will need to remove the back half panel to get a good look at condensor tank

ck
November 2008

Most likely a blown heater element in the drier unit. Also check the fan in the drier unit - if its not rotating, the element will have overheated and possibly triggered a thermal cutout device which cuts off the power to the heater element. Some thermal cutouts can be reset, most need replacing. Only way to test is to disconnect the wiring and take resistance readings across the element and any thermal cutout device with a multimeter. Check all wires and connectors generally for internal breakages - caused by movement of the wiring loom attached to the drum. Over a long period of time the wire strands inside the insulator break through metal fatigue. Although the outside of the wire appears ok the internal is open circuit. Pull on each individual wire - if theyre ok internally, they shouldnt stretch.

Repair and service your own washing machine. Go to www.2ndwave.co.uk/manual.html

dannyboy
November 2008