Just purchased and fitted a new Triton T80si Electric shower. Pressure is fine when the tempreture control is set to cold, but when you turn it, hot all pressure is lost (may as well be a dripping tap), although the heat is there..
there is power to my triton t80si but when i press the start/stop button nothing works can anyone help
woz
July 2009
find out if the water pressure coming into the house is high enough find stop tap and see if it can turn a bit more this might solve the problem if not ask a plumber for advice hope it works
keith west midlands
November 2008
Thanks for the reply Andy..
The unit is actually replacing another T80si (like for like). The element went in the old unit and there were no issues with pressure.
Cheers
Ray
Razor
November 2008
Check that it's manufactured to work with your water pressure. i.e mains or gravity fed, etc...many people buy an appliance, as such, because it's cheap or nice to look at and seldom check correct siutability.
Please let me know you get on?
Andy Conway
November 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix baths and showers.