error code on LG WM 1480fhd?

When I switch it on from the plug/wall socket, the washing machine gives a single beep (it's usually a triple tone beep). There are no lights that come on or no warning lights or codes, etc. The machine will not switch on. The door seems to be shut ok. Can anyone help please ?

steve
November 2009

machine overfilling-Check the pressure switch -the system that determines correct water level in the drum. Its a round item about 3 inches across with several wires connected, it sits under the top cover. Its an air operated switch which tells the machine water has reached the correct level. Disconnect the thin rubber pipe from the switch and blow down through it to clear any blockage. Switch itself may be faulty but its more likely the pressure pipe or the vessel attached to the other end of the pipe is blocked.

Repair and service your own washing machine. Go to www.2ndwave.co.uk/manual.html

dannyboy
November 2008