Promax HE not heating radiators?

Checked for current at the valve motor-ok. Stripped down the valve motor, and smeared the grease better on the plastic cogs inside, checked function. Result- a working CH system and a happy bunny (= me :)

Jim A.
October 2008

Hi, pump working fine, boiler heating water, radiator indicator lighting when thermostat asks for heat. No circulating hot water to radiators still. How do I test the diverter valve motor/ 3-way valve function?
Would Potterton be happy talking to me (the householder) rather than the installer?

Jim A.
October 2008

Hi, pump working fine, boiler heating water, radiator indicator lighting when thermostat asks for heat. No circulating hot water to radiators still. How do I test the diverter valve motor/ 3-way valve function?
Would Potterton be happy talking to me (the householder) rather than the installer?
Thanks.

Jim A.
October 2008

the pump could have failed and isnt circulating the heated water around system to the radiators. unscrew the silver button-head screw on the face of the pump when its running with a small bowl beneath it. if you hear air escape, you had an airlocked pump. if a tiny stream of water drips out, theres no air in the pump, so gently push a small screwdriver into the hole and if you hear a fast clicking caused by the pump impeller spinning, the pump is ok. if no sound, pump u/s. There are other causes, such as faulty diverter valves or major airlocks in the pipework, but pumps are usually the main cause. even new ones can fail !

mark
October 2008

Boiler is still in guarantee suggest call makers

a
October 2008