how do i change an ABS sensor on my peugeot 307(rear)?

Thanks for the advice.

I had already fitted new discs and pads but the problem could have been fixed without doing this.

Followed the instruction in respect of cleaning the sensors and it has cured the ABS problem.

Fred
June 2011

Sounds easy enough, where is the cheapest place to get a new sensor?

Mark
December 2008

Remove wheel you will then need a 5mm allen key to undo the sensor bolt by going through 1 of the wheel bolt holes slide out sensor towards front of vehicle unclip wiring undo the connector then clean up the area where sensor sits as there will be a large build up of rust which has to be removed to get the correct airgap when fitting the new sensor which is about 2mm between sensor and the hub ring

Peugeot master technician
September 2008