I have a two door cabinet, full extention, I don't kown make etc. The drawers won't stay closed. I have tried to remove some of the weight, but this doesn't seem to be the problem. Is there a way to adjust the side slides?
If you are saying that the drawers are on metal runners and that they slide back open when closed then the cabinet may be leaning forward. You can either level up the cabinet or lean the runners so that they are pointing up slightly. To do this you need to remove the drawers and take the rear screws out of the runners into the cabinet sides. Also any middle screws if there are any. Then drill new screw holes slightly lower than the original ones and reassemble. Hope this helps.
Dave of Bexleyheath
September 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cabinets and cupboards.