Hi I just bought this washing machine second hand as a cheap replacement, however it works fine until it spins. The drum seems to move a lot whilst spinning like as if it needs re-securing, causing it too make a lot of banging/cluncking noises.
Is this an easy fix or a common problem on these models.
Thanks.
could be one of the damper pegs has come out.tilt machine back and look under to see if the two dampers are fixed to tub
eddie
September 2008
check the drum for up/down movement 1/8" to a 1/4" movement bearing are shot need replacing if drum movement O K need to check tension springs have not jumped off or broke, or see if the drum dampers are leaking