How do I replace the disk drive on my Snapper mower?

Joe,

Stand your mower on end. Place a crescent wrench on the plate near the ground to enable you to actuate the clutch from where you are working. Loosen the 3 nuts( they are carriage bolts, so hold them in with your finger to keep them from turning). After loosening all 3, use your knee to hold the crescent wrench on the ground which will pull the rubber drive disc away from the clutch plate. Just swap wheels and come back out the same way you went in.

Scott Deaver: B&S Authorized Master Service Technician
June 2005