Mend > Refrigerators

Mend Bosch KGU3201GB/01 Fridge Display Cold Working

E2 ERROR BOSCH KGU3201GB/01?

FRIDGE DISPLAY SHOWS E2 ERROR AND FRIDGE SECTION NOT GETTING COLD ALTHOUGH FREEZER IS WORKING PERFECTLY ALRIGHT .HAVE REMOVED THE SENSOR EMBEDDED DEEP INSIDE INSULATION, DRIED IT BUT HAS MADE NO DIFFERENCE. CAN YOU TELL ME IF THIS IS A PTC OR NTC SENSOR.YOUR HELP WILL BE GREATLY APPRECIATED. THANKING YOU. KIND REGARDS. IQUBAL QURESHI

IQUBAL QURESHI
August 2008

Bosch KGU3201GB/01 Kitchen Appliances, Refrigerators Fridge Display Cold Working

Thank you Russia

kgu help
September 2014

Google Translate this and you"ll find the solution......

http://www.elremont.ru/holod/fz_eng/fr_rem33.php

Enjoy your KGU again.

kgu help
September 2014

Turn your fridge freezer off. Defrost your freezer, then wait 24hrs (or less). The fridge may start working again. I was without my fridge for a month, although the freezer worked perfectly. The freezer then began making clicking noises, and the E2 started to flash intermittently with 20 deg, as tho the fridge was trying to work. I defrosted the freezer, and it began working the following day!

Karen
July 2009

Hi Iqubal,
You need to get the right sensor from bosch.
All sensors have a resistance that needs to corrospond with the tempreture it reads to relay that to the PCB.
Only the right sensor will do the job
You may find that the part will come in a kit form as most foamed in sensors are not designed to be replaced.

Big Tone The Fridge Man
August 2008