Strange fault code (6) on Optima 2 Plus?

Afraid I can't think of anything other than what is already mentioned but maybe one of you can help me. I moved home recently and the previous owner left no user guide (only the existing 4 digit code) for the Optima Plus 2 Alarm. Naturally I would like to change it but am unsure of the correct procedure. Any help guys please. Replies to tel@tlangham.freeserve.co.uk would be much appreciated. Terry

telboy
October 2008

the 6 you see is probly a B or b which could indicate a fault on the bell box

jimmy.thompson1@btinternet.com
August 2008

I also have a fault code 6 appearing as a tamper code which periodically appears when the optima plus 2 alarm is not set .... the alarm sounds inside only when this fault occurs, would be interested in sharing answers if you receive any....

Richard
August 2008

acorn, thanks for your response. I'm afraid '0' - reset etc hasn't cured the problem but I will replace the battery in a couple of days and then try again.

Colin
August 2008

The battery in that state could def. be giving unexplained faults of one kind or another - needs replacing sooner rarter than later.

Now, display showing '6' - the only way the No 6 shows is by putting the system into Engineering mode & asking the panel to do a Digital Communicator Test by pressing, 6.

Pressing '0' should stop this test.

Then pressing Reset, once or twice (can't remember which) should, as in should, get you back to Day Mode

acorn
August 2008