I've remover the pump and cannot find any timing or alignment marks to re-time. Can anyone help me with this or give me any reference marks to work from? Obviously I am set at TDC on number 1 cylinder and the marks are aligned on the crankshaft pulley and on the cam shaft, but I cannot find any alignment marks on the pump...help!!!!
take out injector pump and aline missing spline to no 1 injector outlet by turning in clock-wize direction till resistance is felt turn crankshaft back to 15 degrees and insert pump it worked for me
mark
May 2012
isnt there a 6mm hole in the sprocket spoke that aligns with a 6mm hole in the pump mounting plate for the pump locking pin?
caine
June 2008
Automatic Answer
We may have found other answers which could help you.