Thanks all on here.
Had a bare copper wire showing at switch lead entry.
After using this actual string and 5mins fixing time all up and working perfectly.
WELL DONE ALL.
MIKE
Mike
January 2007
lever out the switch button with a terminal screwdriver, it may break doing this. Under there is a T15 screw to take out so the housing can be lifted off. Dyson can repair this with a whole new flex for £39 and 1yr guarantee.
No drilling needed !
Dyson engineer
September 2005
eric
your a legand
thanks
Alan
alan
September 2005
The reference is excellent and will save lots of time and ££s. I suggest you stick Sellotape over the switch cover and drill in two stages. The result is very clean and certain.
John
September 2005
Have a look here : http://www.clayraku.fsnet.co.uk/Dyson/switch.html
howtomendit.com for free repair help, information and advice.
