I had the same problem, and through much internet searching I found this information:
Press the select button to choose the setting you desire. Each time you press the select button the setting will advance in the following sequence: Basic, French, Rapid, Whole Wheat, Dough/Pasta, Bake.
CYCLE DESCRIPTIONS
Basic: Most used setting, ie. standard white bread, raisin, etc. - total time 2 hours 40 minutes.
French - Heartier crust, includes third rise cycle, total time: 3 hours 30 minutes.
Rapid - Hurry - Makes bread faster, usually used for Classic White Bread. Remember to increase water by 2 tablespoons when using the Rapid cycle - total time: 1 hour 30 minutes.
Whole Wheat - Longer rise cycles - total cycle time: 3 hours 20 minutes.
Dough/Pasta - Prepares dough for rolls, specialty breads, pizza and pasta - when dough cycle is done, dough is removed from machine, shaped by hand and allowed to rise a final time out of the machine before oven baking - total time in machine: 1 hour 20 minutes.
Bake only - Used for baking doughs, batter breads, jams and rice - total time: 50 minutes.
CRUST CONTROL
Crust control is automatically preset for medium crust setting, if you want lighter or darker press crust control until the indicator light you want lights.
DELAYED BAKING
Timer = press the up or down button to set the timer for delayed baking, each time you press the up arrow you will advance the setting by 10 minutes, each time you press the down arrow you will decrease the setting by 10 minutes.
TURN OFF MACHINE
Stop button, turns off the power after baking is completed. To take effect you must press down for a total of 3 seconds.
DISPLAY INFO
H:HH flashing - oven chamber to hot, open cover, remove bread pan, allow to cool with cover open. the unit will beep when cool enough to restart and 0:00 will appear on the display.
Select button: Press select to choose the setting you want. Each time the select button is pressed the setting advances, normal, dark, french, sweet, or dough. The dot nearest the selection will glow.
Start button: press start to begin the process of the setting you selected. The time for a finished loaf will appear, and display in window.
normal;2;20
dark;2;25
french;3;30
sweet;3;30
dough;1:20hrs.
Stop Button: Press stop to turn off the power when baking is completed and remove the bread. Or press stop if you decide to make a change, or to stop baking. To take effect you must hold down the button for two to three seconds. You will hear a beep indicating it has been done and the display panel will go dark.
Timer set button: before setting timer you must select the setting. Each time the select button is pressed the setting advances in the following setting normal, dark, french. Delayed baking will not work for the sweet or dough settings.
Press the plus button until the correct length of time appears is window.
plus;; each time the button is pressed advances 10 minutes
minus;; each time this button is pressed the timer goes back 10 minutes.
If you go past the desired time merely press the minus button to go back to desired time.
If you hold the button down it will advance or reverse the setting quickly.
Not all recipes are suitable for delayed baking because of items like fresh milk or eggs could spoil.
Beth
August 2005