possible power supply failure. you will need to get an electrician or competant person to check the pull cord switch terminals as i have attended a few instalations where the terminals holding the electrical cables were not tight enough, a common sign is the ends of the wires turning black, if this is the case trim off the burnt end of the cable and fit a new pull cord switch, this will fix the problem
chris
May 2008
Check the main fuse or trip switch at your consumer unit first. Does the shower have a pull switch fixed to the bathroom ceiling with a neon indicator? You need to get power to this switch before you'll get anywhere.
John
May 2008
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix general d.i.y.