Mend > Oil Filled Radiators

My Worcester Danesmoor 15/19 keeps going into lock out?

There is plenty of oil in the tank, and the pipes start heating up quite nicely before it locks out. It runs for approx 5 minutes before locking out. What are the possible causes of a lock out?

Ian
April 2008

Worcester Heating, Oil Filled Radiators Worcester Lock Oil

my worcester danesmore 15/19 keeps on locking out after about 2 minutes it has oil in tank it ran the other day for about 2 houres then after that
it just keeps on cutting out

kevin washington
October 2015

Hi Ian,

Sounds like a number of things, firstly a good service, clean, change the nozzel, check pressure, set air ratio.

The assuming the coil, photocell and capacitor are all in good condition I would be checking your flue for obstructions, looking for possible flue-gas recycling as a cause of the flame out.

T
May 2008

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Worcester Lock Oil

Click here to mend Worcester oil filled radiators

worcester danesmoor 20/25, lockout/repriming tigerloop and pump?

worcester heatslave 20/25 central heating but no hot water?

whats wrong with my Worcester Danesmoor 12/14?

how do I remove the burner from my Worcester Bosch 15/19 - ?

How to switch off lock out light?

how many rads can a worcs danesmoor 20/25 run ?

Where can I get parts for a Worcester Heatslave boiler?

Where is the reset button?

How to put gas boiler on again after non use? Worcester Junior model?

Camray 5 'lockout'?

Worcester heatslave 20/25?

hot water but no heating?

Mend Worcester Oil Filled Radiators

Related Categories

Mend > Oil Filled Radiators

My Worcester Danesmoor 15/19 keeps going into lock out?

Automatic Answer

My Worcester Danesmoor 15/19 keeps going into lock out?

I can answer this question ...

My Worcester Danesmoor 15/19 keeps going into lock out?

How to mend ...

Mend oil filled radiators ...

Daewoo hea1130 model 7 fin?

Firebird Combi?

Efficiency of my oil heater?

What size spanner to free rad bleed valve?

Comfort zone?