Mend > Oil Filled Radiators

Air lock in heating system?

We ran out of oil for our heating then we got some more delevired but the oil is not getting to the radiators as we think there must be an air lock. how do you bleed the boiler to get the oil through?
Boiler is a Worcester Danesmoor 15/19

Jaynie Hollister
March 2009

Worcester Heating, Oil Filled Radiators Heating System Boiler

I have just reconnected a central heating boiler after moving it to another place and adding a new radiator. No water is going though the system and I suspect an air lock. What can you suggest

Tommy
October 2011

Thank you very much from another idiot who ran out of oil!!

Symes the Cowdenbrummie
March 2009

open the burner cover and ther should be a bleed screw on d bottom left of the burner as you look at it,if not loosen the oil hose entering the burner and when oil starts dripping press the red button on the burner in front of you!very easily done

declan o keeffe
March 2009

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Heating System Boiler

Mend repair fix Worcester oil filled radiators

hot water but no heating?

worcester heatslave 20/25 central heating but no hot water?

worcester danesmoor 20/25, lockout/repriming tigerloop and pump?

how do I remove the burner from my Worcester Bosch 15/19 - ?

how many rads can a worcs danesmoor 20/25 run ?

Where is the reset button?

How to put gas boiler on again after non use? Worcester Junior model?

Camray 5 'lockout'?

How to switch off lock out light?

Worcester heatslave 20/25?

Where can I get parts for a Worcester Heatslave boiler?

whats wrong with my Worcester Danesmoor 12/14?

Mend Worcester Oil Filled Radiators

Related Categories

Mend > Oil Filled Radiators

Air lock in heating system?

Automatic Answer

Air lock in heating system?

I can answer this question ...

Air lock in heating system?

How to mend ...

Mend oil filled radiators ...

Daewoo hea1130 model 7 fin?

Firebird Combi?

Efficiency of my oil heater?

What size spanner to free rad bleed valve?

Comfort zone?