First make sure that you have the correct code ......then press AS plus the ON button at the same time and leave it on undisturbed for at least a couple of hours.(don`t press any other buttons !)...After a couple of hours (or more) just enter enter the code , press AS again (you should hear a "beep") and all should be OK. However if the radio switches itself off off automatically after an hour or so , and it is still locked then you are going to have to take it out of the dashboard and wire it up via the ISO socket at the rear to a battery (plus connect a speaker) and repeat the above. (AS plus ON together then leave for at least 11 hours. )This normally works + should then reset it. note: The length of time to leave it switched on depends on how many previous incorrect codes have been entered. If it was 10 , then the time will be 640minutes (nearly 11 hours). Please post back here whether successful or not..Good luck!
RegWorts
April 2008
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix in-car audio.