The 'rinses' light is flashing and the machine will not run a program other than to fill with water then drain. This is followed by the beeping alarm. Turning dial to off, switching on/off etc. doesn't seem to clear the fault.
I would appreciate any ideas for fixing this fault.
ihave the same model my door wont open after a short wash ,there is water in the bottom sump of the machine if i tip it and let it run out only then does the door release. wot was ur problem in the end curious to know thanks dully.
dullfos@hotmail.com
February 2009
Oh dear!! Brought in the serviceman this morning. It looks like one of the boards is faulty. A very expensive fault...